Wheeled Duct Rodder
  • Wheeled Duct Rodder
  • Wheeled Duct Rodder
  • Wheeled Duct Rodder

Wheeled Duct Rodder

Huaer is specialized in power cable equipments and construction tools. The fiberglass duct rodder produced by our factory has three types: portable duct rodder, wheeled duct rodder and traceable duct rodder.


Wheeled Duct Rodder

Mainly application: Commonly used for cable laying in the conduit or the cable pipe cleaning underground. It can be made the work finished easily and efficiently. 




Inquire Now Next

Wheeled Duct Rodder

Mainly application: Commonly used for cable laying in the conduit or the cable pipe cleaning underground. It can be made the work finished easily and efficiently. 


The Rod:

The rod of wheeled duct rodder diameter is 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm and the length is from 50m to 300m. The rod is composed of fiber glass rod which was extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer which make duct rodder cover sliding on surface, durable, corrosion resistant and has good insulation performance. Such perfect design has high safety aspects to use for electric wire laying applications because of its non conductivity of electricity and sets a major safety to site workers .


There are meter marks on the protect layer of the rod which can be used for measuring distance. Marks are printed by professional printing machine, which has the advantage of strong adhesion, clear writing, waterproof, anti-ultraviolet, it can be still clear even after using many times.

The meter mark can be measured in mm or feet and we also can print your company website on the rod according to your request.


Two pieces of steel drawing heads are crimped on the end of the rod which can be connected with the cable or wire. We also can supply different types of drawing head according to your usage.

Different rod color can be choose, but the most popular color is yellow. 


The Frame:

Frame size: 

95cm*90cm*48cm; 105cm*100cm*48cm; 130cm*120cm*48cm; 150cm*140cm*48cm

Frames are also a feature of the duct rodder systems. The rod will be equipped with different size frame according to the length.

The frame is welded with 0.35mm thick steel tube and electroplating spraying into different color.   The lead ring on the frame is the gallery of the rod. Hand operated brake is used for controlling payout of the pulling rod. The rotating and stopping of the rod can be easily controlled by the brake device. All of the frame design make the whole structure is much more stable when pulling the rod from the frame. Wheeled duct rodder performs apparent advantage over portable duct rodder when the conduit or pipe is very long or complicated. Wheeled duct rodder is made with a rubber wheel on the cage, which makes it easier to transport at the job site. The wheel can be made into pneumatic or solid rubber tire with iron wheel rim. When moving the duct rodder to the job site, press down hard on the grip of the frame, towards the direction of the wheel, and move on the wheels.So that the product make every unit more usable and friendly for the end user.

Different frame color can be choose, but the most popular color is silver and black. 


Rod Selection 

Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including: 

• The size of ducting it is to be pushed through 

• The distance the rod is to be pushed 

• The number and tightness of bends in the ducting 

• If the ducting is already occupied by cable 


When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals. Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends. 


Specification

Type

Rod Diameter
(mm)

Rod Length
(m)

Frame Dimension
(mm)

Weight

    (kgs)

HE-8100

8

100

950*900*480

20.5

HE-8150

8

150

950*900*480

24.8

HE-8200

8

200

1050*1000*480

35.0

HE-10150

10

150

1050*1000*480

38.3

HE-10200

10

200

1300*1200*480

50.0

HE-10250

10

250

1300*1200*480

56.8

HE-10300

10

300

1300*1200*480

63.5

HE-11150

11

150

1050*1000*480

39.9

HE-11200

11

200

1300*1200*480

52.2

HE-11250

11

250

1300*1200*480

59.5

HE-11300

11

300

1300*1200*480

66.8

HE-12150

12

150

1050*1000*480

42.0

HE-12200

12

200

1300*1200*480

55.0

HE-12250

12

250

1300*1200*480

63.0

HE-12300

12

300

1300*1200*480

71.0

HE-13150

13

150

1500*1400*480

62.5

HE-13200

13

200

1500*1400*480

74.0

HE-13250

13

250

1500*1400*480

85.5

HE-14200

14

200

1500*1400*480

76.0

HE-14250

14

250

1500*1400*480

88.0

HE-16200

16

200

1500*1400*480

84.0

HE-16250

16

250

1500*1400*480

98.0




Tel: +86 311 6759 2576    +86 187 3118 5295
Fax: +86 311 6759 2769
Add: No. 98, Yellow River Avenue, High-Tech Zone, Shijiazhuang, Hebei, China
Copyright© Hebei Huaer Trade Co.,Ltd All Rights Reserved
Sitemap
Technical Support: